ChatterBank1 min ago
Changing Barrels!
How long should it take to change a beer barrel in a pub?
I ask cuz I recently had to wait about 1/2 hour!!
Answers
No best answer has yet been selected by piggynose. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Retrocop, no they don't. They clean the pumps once a week. If it's a cask barrel that needs changing, it could take several minutes - certainly not a half hour. If it's a measured pump, a couple of minutes max.
Piggy, are you sure you were waiting for the barman/woman to change the barrel and not clean the pumps. A half hour sounds bout right for the pump cleaning.
By the by, i ran two bars for a total period of just over 3 years and both were electric meaures.
I've worked in, and managed, plenty of bars.
Assuming that the 'spare' keg is already positioned alongside the empty one, changing a 'top pressure' beer should take less than 10 seconds (plus, of course, the time to get to and from the cellar area).
If a real ale has already been tapped (as it should have been), removing the spile peg and switching the line over should only take a minute or so.
Then, in either case, some beer will need to be drawn through the line before what's coming out of the pump is fit to be served to a customer. (For a keg product, that simply means clearing a bit of froth out of the line. For a real ale, the beer needs to be pulling 'clear' before it can be served).
You could have a longer wait though, Piggy. I once worked in a pub where a couple ordered two cheese sandwiches at 12.45pm. After a really long wait, I was despatched in my car to go and buy some cheese. After another long wait, I was then sent out again to buy some butter. After a third period of waiting, I was sent out on a further journey, this time to buy some bread. Yet another wait then ensued, with the customers finally getting their sandwiches at 4.15pm!