Rhubarb Wine
* 6-7 lbs red rhubarb
* 2-1/2 lbs finely granulated sugar
* 2 large lemons (juice only)
* water to make up one gallon
* 1 crushed Campden tablet
* 1 oz precipitated chalk
* 1-1/2 tsp yeast nutrient
* Sauterne wine yeast
Wash the rhubarb and cut into 1/2-inch lengths. Crush with a piece of sterilized hardwood (the end of a baseball bat is perfect) and put into primary. Dissolve crushed Campden tablet in gallon of cold water and pour over rhubarb. Cover primary and let set for three days, stirring daily. Strain through a nylon straining bag and squeeze as much liquid as possible from the pulp. Discard pulp and return liquor to primary. Add the precipitated chalk (obtainable at winemaking shop). The liquor will fizz, but then settle down. Wait 3 hours and taste. If oxalic acid taste is still too strong, add another 1/2 oz of precipitated chalk. Stir in all remaining ingredients, making sure the sugar dissolves completely. (NOTE: You may want to hold back one pound of the sugar and add it after fermentation is well on its way.) Cover and set aside overnight. Transfer to secondary and fit airlock, but to allow for foaming during fermentation hold back a pint or so in a small bottle plugged with cotton. When ferment settles down (5-7 days), top up with reserved liquor and refit airlock. Set aside in cool place until wine begins to clear. Rack, refit airlock and top up. Allow at least another two months, making sure fermentation has ceased, and rack again. If possible, cold stabilize wine for 30 days. If you can't cold stabilize, at least allow the wine the additional 30 days. Rack into bottles or blend with another wine.
If you bottle the rhubarb wine pure, it is drinkable right away. If you blend it, age it according to instructions for the wine you are blending with. If you make a 3-5-gallon batch, add 1/8 tsp tannin per gallon