Donate SIGN UP

Changing Barrels!

Avatar Image
piggynose | 21:45 Sat 06th Apr 2024 | Food & Drink
13 Answers

How long should it take to change a beer barrel in a pub? 

I ask cuz I recently had to wait about 1/2 hour!!

Gravatar

Answers

1 to 13 of 13rss feed

Best Answer

No best answer has yet been selected by piggynose. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Gasping were you!!??!!

They usually,if they have a decent cellar man, flush the lines through before a change of barrels.

Small enough not to have room for a second barrel online in the cellar, but good enough to flush their lines through. 

Less than 10 mins when I used to do it when I worked in a pub as a teenager (more like 5 mins)

Retrocop, no they don't. They clean the pumps once a week. If it's a cask barrel that needs changing, it could take several minutes - certainly not a half hour. If it's a measured pump, a couple of minutes max.

Piggy, are you sure you were waiting for the barman/woman to change the barrel and not clean the pumps. A half hour sounds bout right for the pump cleaning.

By the by, i ran two bars for a total period of just over 3 years and both were electric meaures.

The bar staff will have a weekly allowance of wastage which will include pump cleaning. If the lines were flushed through every time a barrel was changed, they would be well over this allowance and there would be quite a deficit on their monthly stock-check.

I've worked in, and managed, plenty of bars.

Assuming that the 'spare' keg is already positioned alongside the empty one, changing a 'top pressure' beer should take less than 10 seconds (plus, of course, the time to get to and from the cellar area).  

If a real ale has already been tapped (as it should have been), removing the spile peg and switching the line over should only take a minute or so.

Then, in either case, some beer will need to be drawn through the line before what's coming out of the pump is fit to be served to a customer.  (For a keg product, that simply means clearing a bit of froth out of the line.  For a real ale, the beer needs to be pulling 'clear' before it can be served).

You could have a longer wait though, Piggy.  I once worked in a pub where a couple ordered two cheese sandwiches at 12.45pm.  After a really long wait, I was despatched in my car to go and buy some cheese.  After another long wait, I was then sent out again to buy some butter.  After a third period of waiting, I was sent out on a further journey, this time to buy some bread.  Yet another wait then ensued, with the customers finally getting their sandwiches at 4.15pm!

I just read that as Changing Barsels!

Thought you must be getting rid of me.

^^^ One always changes a barrel for something very similar, Barsel, but there could never be anything remotely similar to you, could there? 😊

Oh no Chris, you will never find another me.😄

Question Author

It was in a wspoons pub in bham new st station. So quite new place. Anyway the beer was a real ale, Ruddles best.

The people involved were id say typical uni grads.

Question Author

While this was happening a bystander sarcastically said does it really need 3 people to sort this out ? 

Perhaps it was an IKEA pub and he was trying to follow the instructions 😂

1 to 13 of 13rss feed

Do you know the answer?

Changing Barrels!

Answer Question >>

Related Questions