Quizzes & Puzzles0 min ago
How can I build my own well in my back yard?
16 Answers
I know that you normally need planning permission to build anything over 6 feet tall but what about a well? Do you need it for that and can you build a well yourself? What equipment do you need to hire and how long would it take? How much would it cost to build a big one?
Hope you will be able to help with my query and thanks in advance for any replies.
JB12
Hope you will be able to help with my query and thanks in advance for any replies.
JB12
Answers
Best Answer
No best answer has yet been selected by JonnyBoy12. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Have you checked the geology of your area? Not everyone has accessible water below their property!
The first step is a professional survey (to find out if there is water and, if so, how deep it is):
http://www.synergybor.../waterwell_boreholes/
Chris
The first step is a professional survey (to find out if there is water and, if so, how deep it is):
http://www.synergybor.../waterwell_boreholes/
Chris
-- answer removed --
No licence is needed for private users abstracting under 20 cubic metres a day—that’s 20,000 litres of water. But you need to construct a safe bore hole with supporting construction, so best get the professionals in.
There are plenty of Borehole drilling services depending where you are, but here are a few examples.
http://www.cruwman-dr...-vM1a0CFbIhtAodshAikw
http://www.daleswater...es/borehole-drilling/
http://www.waterwell-engineers.co.uk/
Got me wanting one now! We found a well in our garden 10 yrs ago, but it was filled in. Maybe we should reopen it..........?
There are plenty of Borehole drilling services depending where you are, but here are a few examples.
http://www.cruwman-dr...-vM1a0CFbIhtAodshAikw
http://www.daleswater...es/borehole-drilling/
http://www.waterwell-engineers.co.uk/
Got me wanting one now! We found a well in our garden 10 yrs ago, but it was filled in. Maybe we should reopen it..........?
Depends on to what use you'll put the water from the well.
If it's only going to be used for irrigating a lawn or garden then the use of what we call "surface water" here in the U.S. is a relatively simple process. One can do it in about 2 hours, depending on the depth. Surface water ( a misnomer, of course) extends to about 50 feet but depends on a number of things. Surface water should never be used for human consumption of course. That type of well can never be more than about 30 feet deep in any case, thanks to the laws of physics.
For deeper wells, especially if the provided is water intended for human consumption, a "short hole" (about 10- 25 feet deep) is drilled (actually pounded), the drill stem removed and the hole filled with concrete. After a day to allow for the curing of the concrete, a hole is then drilled through the concrete and "cased" (lined) with steel pipe as the hole descends. (This keeps the contaminated surface water from draining down to the 'good' water).
Here in the western U.S. most wells are usually 150' to 250' deep, but obviously depends on geology.
One word of caution... if you're property is smallish, under and acre, say, (our ranches out here are several sections large) the drill stem on a deeper well can actually bend and wind up under someone else's property... not a good thing legally speaking...
If it's only going to be used for irrigating a lawn or garden then the use of what we call "surface water" here in the U.S. is a relatively simple process. One can do it in about 2 hours, depending on the depth. Surface water ( a misnomer, of course) extends to about 50 feet but depends on a number of things. Surface water should never be used for human consumption of course. That type of well can never be more than about 30 feet deep in any case, thanks to the laws of physics.
For deeper wells, especially if the provided is water intended for human consumption, a "short hole" (about 10- 25 feet deep) is drilled (actually pounded), the drill stem removed and the hole filled with concrete. After a day to allow for the curing of the concrete, a hole is then drilled through the concrete and "cased" (lined) with steel pipe as the hole descends. (This keeps the contaminated surface water from draining down to the 'good' water).
Here in the western U.S. most wells are usually 150' to 250' deep, but obviously depends on geology.
One word of caution... if you're property is smallish, under and acre, say, (our ranches out here are several sections large) the drill stem on a deeper well can actually bend and wind up under someone else's property... not a good thing legally speaking...
You may well require planning permission, as I suspect it would fall under the definition of development as per s55 of the Town and Country Planning Act 1990 because it would involve the carrying out of building, engineering , mining or other operations in/on/over/under land. A well doesn't appear to fall within any of the permitted development categories.
Hi, JonnyBoy12
try this website as well as the synergie I saw someone else also sent you a link to: http://www.george-applegate.co.uk/index.html
but simply put into google something like "own well". "own water-borehole" or the like and loads of companies come up - talk to them, etc.... I am in the same boat - so to speak! good luck. t.
try this website as well as the synergie I saw someone else also sent you a link to: http://www.george-applegate.co.uk/index.html
but simply put into google something like "own well". "own water-borehole" or the like and loads of companies come up - talk to them, etc.... I am in the same boat - so to speak! good luck. t.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.