Donate SIGN UP

Zanussi Washer/dryer

Avatar Image
rd14962 | 12:36 Wed 19th Nov 2014 | DIY
4 Answers
I have just purchased one second hand. I know it was working. Now that it is connected up in my kitchen it wont run a cycle. It just empties. There is a good water supply connected and no kinks in the pipes. It just whirrs and clicks and then goes back to start. Any ideas please?
Thank you in anticipation.
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by rd14962. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If you could give us the model number, and the age of the machine, someone might be able to help.
Clean the filter
Not an expert but if it drains ok I'd have thought the filter wouldn't be the issue. I'd expect the electronics of going duff. I can't think of any sensor that fools the electronics into 'thinking' the rest of the programme is ended before it's begun. Perhaps it had an intermittent problem so they got rid of it ?
Question Author
Hi it is a Zanussi ZJD 12191 and about 4 years old. Thank you.

1 to 4 of 4rss feed

Do you know the answer?

Zanussi Washer/dryer

Answer Question >>