Yvette Cooper Didn't Dawn Butlers Post.
News0 min ago
armoured cable stripping
Best technique ? 2.5 T&E
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by Matheous. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
If you are stripping to fit glands, measure back the length of the tail required then using a junior hacksaw cut thru the outer sheathing and about half way thru the armour, Using a sharp knife slit and remove the outer sheath, unwind the armorings and they should break cleanly where they have been scored. Fit the parts of the back gland, then measure the length of armour needed to fit the cone clamp and remove the outer sheath rotate the inner sheath to open the armourings & you can then assemble the gland.
If you are stripping it for the copper I'm afraid its the old knife & saw and hard work, as an apprentice at B.C. I had to strip miles of armoured cable of all sizes. If you are some where out of the way a fire will get rid of some of the P.V.C but it's smokey and smelly
If you are stripping it for the copper I'm afraid its the old knife & saw and hard work, as an apprentice at B.C. I had to strip miles of armoured cable of all sizes. If you are some where out of the way a fire will get rid of some of the P.V.C but it's smokey and smelly
1 to 2 of 2
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.