bathroom radiator on indirect hot water loop

[J.JJ]

can anybody direct me to a website which shows the configuration for a central heating system, that comprises a radiator located on the indirect hot water loop controlled by a programmer such as a randall 102e wired via a zone valve.

i want the radiator to heat the bathroom when the indirect hot water circuit is on and the central heating is switched off.

thanks in advance.

[tezestwing]

Hi J Like the idea but I would have thought that by doing that you will be interfering with Part L hot water cylinder standards,not sure though, as to the feasibility it is only a tee off extension from the cyl coil and would be controlled by the mid port 3 way unit hth Tez

[J.JJ]

I am actually looking for diagrams showing the pipework arrangement and the position and type of zone valve required,
together with the wiring information to incorporate a Randall 102E 24 hour electronic programmer that I have already. I have the user booklet for setting the programmer but do not have any information as to how to wire it between the boiler room thermostat and zone valve etc.

Would be grateful for any help, thanks in advance.

[J.JJ]

SORRY I FORGOT A COMMA BETWEEN BOILER AND ROOM THERMOSTAT.

SHOULD READ LIKE THIS !!!!

I am actually looking for diagrams showing the pipework arrangement and the position and type of zone valve required,
together with the wiring information to incorporate a Randall 102E 24 hour electronic programmer that I have already. I have the user booklet for setting the programmer but do not have any information as to how to wire it between the boiler, room thermostat and zone valve etc.

Would be grateful for any help, thanks in advance.