ChatterBank1 min ago
Bosch combi boiler
My combi boiler keeps losing pressure I top it up to 1 bar and it takes roughly half a day to go down to 0.5 of a bar it is bleed properly so there is no air in the system . The first thing I thought of was leaks so I have checked everywhere rads piping and boiler cant find a drop anywhere. I have also kept a eye on the overflow from the pressure release valve and nothing is coming out of that,any help greatly appreciated cheers
Answers
Best Answer
No best answer has yet been selected by joesdaddy. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hi joesdaddy. Had the same problem with my Bosch Combi (only 13 months old), it turned out to be a porous heat exchanger. It was still under warranty so they just changed it for a new one, no problems so far but its only been 9 months yet.
Engineers paid umpteen visits, trying all the different things that make combi's loose pressure, tried to convince me that there was a slow leak in the system and wanted all the floor boards up. Eventually admitted that it was a known fault with my boiler type.
Good luck in getting a quick diagnosis.
Engineers paid umpteen visits, trying all the different things that make combi's loose pressure, tried to convince me that there was a slow leak in the system and wanted all the floor boards up. Eventually admitted that it was a known fault with my boiler type.
Good luck in getting a quick diagnosis.
As the water heats in your system it expands. Since it's a 'closed system' there has to be somewhere for the extra water to go. So your boiler has in it an 'expansion vessel'. This is a cylindrical tank divided in two internally by a rubber diaphragm, with water from the system on one side, and air under a bit of pressure on the other side. If you're really sure that your system has no leaks anywhere else, it's quite possible that there could be a leak in the rubber diaphragm, and that's allowing the water to escape. It's not an uncommon occurrence, and if this is what's happening, the only answer is to have the expansion vessel replaced.
AlBags. Therein lies the clue, on a very cold morning my boiler would send so much "steam" out of the flue we thought that the "the Mallard had pulled up outside". The engineer who finally diagnosed the problem said that if the other engineers had listened to my explanation they would have known what the fault was much earlier.