Crosswords0 min ago
Stone Cottage - Tie Bars
10 Answers
Hi,
I own a stone cottage which was built around 1650 and the front and rear walls have wall bulge resulting in cracks.
We had a full structual survey when we pirchased the house and the structual engineer did mention wall bulge in his report stating there would be a gradual bulging of the exterior walls due to the weight of the concrete tiled roof as opposed to the original thatched roof that was replaced in 1910.
The cracks are nothing serious (a few millimeters) which take around 6 months to re-appear after redecorating, but non the less, they are annoying.
The surveyor stated I should install wall to wall tie bars (from front to rear wall) at somepoint and I am now looking towards taking his advise.
Does anyone know where I can purchase these tie bars? Needs to be about 20 foot long with the ornemental face plates on either end. I live in the Northamptonshire area.
Many Thanks
I own a stone cottage which was built around 1650 and the front and rear walls have wall bulge resulting in cracks.
We had a full structual survey when we pirchased the house and the structual engineer did mention wall bulge in his report stating there would be a gradual bulging of the exterior walls due to the weight of the concrete tiled roof as opposed to the original thatched roof that was replaced in 1910.
The cracks are nothing serious (a few millimeters) which take around 6 months to re-appear after redecorating, but non the less, they are annoying.
The surveyor stated I should install wall to wall tie bars (from front to rear wall) at somepoint and I am now looking towards taking his advise.
Does anyone know where I can purchase these tie bars? Needs to be about 20 foot long with the ornemental face plates on either end. I live in the Northamptonshire area.
Many Thanks
Answers
1 to 10 of 10
Best Answer
No best answer has yet been selected by worriedfather. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
It's not listed (part of the reason why we bought it in the first place) and the foundations (if you can call them that) were checked and confirmed the ground work was solid.
I will be asking for another report, but just wanted to know where I could buy the bars from.
I have a feeling I will need to approach a metal works factory.
I will be asking for another report, but just wanted to know where I could buy the bars from.
I have a feeling I will need to approach a metal works factory.
I've done this a few times ................ simple to do and very effective.
One way is to use 25mm round bar ............ threaded at each end (the last foot or so).
The plates will depend on how "ornamental" you need them to be.
Do you have a local steel fabricator? Maybe one who also makes gates,railings etc.
The Struct. Engineer will know someone, I'm sure. They'll have done this before, and will be able to help you with the design and shape of the plates.
25mm hole in each plate ......... big washer and nut on the end. Cut off excess thread with an angle grinder and mutilate the end to stop some prat from unscrewing it :o)))
One way is to use 25mm round bar ............ threaded at each end (the last foot or so).
The plates will depend on how "ornamental" you need them to be.
Do you have a local steel fabricator? Maybe one who also makes gates,railings etc.
The Struct. Engineer will know someone, I'm sure. They'll have done this before, and will be able to help you with the design and shape of the plates.
25mm hole in each plate ......... big washer and nut on the end. Cut off excess thread with an angle grinder and mutilate the end to stop some prat from unscrewing it :o)))
These things are more typically called tie rods - rather than tie bars, which generally refer to tying together cavity walls (not what you want).
Try phoning a few smaller metal engineering companies - it is just tensile steeel with ends on.
It will require a structural engineer to undertake the calcs to design it.
The age of a old building has no bearing on a its listing status - absolute zilch. Where do these people get such unhelpful ideas from. The quality of design, provinence and appropriate use of materials has far more weight of importance. How many old listed parish churches do you know Boxtops?
Try phoning a few smaller metal engineering companies - it is just tensile steeel with ends on.
It will require a structural engineer to undertake the calcs to design it.
The age of a old building has no bearing on a its listing status - absolute zilch. Where do these people get such unhelpful ideas from. The quality of design, provinence and appropriate use of materials has far more weight of importance. How many old listed parish churches do you know Boxtops?
1 to 10 of 10
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.