Stapling chipboard to rafters

pdq1 | 16:28 Thu 03rd May 2012 | Home & Garden

3 Answers

What sort of stapler is best for attaching 3 or 4mm chipboard to rafters? The one I use seems incapable of attaching it firmly.

F.A.O buildersmate

Lamp bases

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by pdq1. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

pdq1

Question Author

Showing my ignorance, not chipboard but hardboard.

Clanad

Just finished lining a workshop with oriented strand board (OSB here in the U.S.)( seen here: http://www.123rf.com/...d-mdf-background.html ) which was 1/4 inch in thickness (maybe 6 to 7mm?) and found that decking screws about 1/2 to 3/4 inches worked best. Even then, one needs to be careful when cutting the joints to center each board on its rafter exactly 1/2 to have enough board to screw into...

The Builder

I think you'd really need one like this pdq.............

http://www.hss.com/g/...astening-Stapler.html

That's quite a thickness for anything in the realm of diy. I would go with Clanad's method............ and a cordless drill/screwdriver.

1 to 3 of 3

Do you know the answer?