ChatterBank4 mins ago
Does Anyone Know Why Holes Are Being Drilled
22 Answers
in the walls of my neighbours' house? The man has drilled holes at the corners of the house about 4ft from the ground, inserted some sort of probe attached to a black box (pocket camera size); removed the probe after a couple of minutes and sealed the hole with a mastic gun.
After drilling several holes he attached the black box thing to a tablet pc, I think.
He's been about an hour.
I could ask the neighbour but I don't want to appear nosey :)
After drilling several holes he attached the black box thing to a tablet pc, I think.
He's been about an hour.
I could ask the neighbour but I don't want to appear nosey :)
Answers
Best Answer
No best answer has yet been selected by hc4361. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.In certain parts of the country they used black ash mortar to build houses. This happened in the 1930's. Black ash was a byproduct of the steel works and was used instead of sand. The chemicals in the ash reacted with the cement causing the wall-ties to corrode & expand. This caused the walls to crack & in some cases collapse. Hope this hasn't scared you.
Killer Bees from Africa have over run our indigenous Bee and are now a problem in many parts of the UK.
A procedure, such as the one you describe is undertaken by DeFRA. This is being done secretly, as the authorities are worried about starting a panic.
http:// en.wiki pedia.o rg/wiki /Africa nized_b ee
You should stay indoors, shut all the windows, and not go out until "Bargain Hunt" has finished.
A procedure, such as the one you describe is undertaken by DeFRA. This is being done secretly, as the authorities are worried about starting a panic.
http://
You should stay indoors, shut all the windows, and not go out until "Bargain Hunt" has finished.
Could be as carrust says and it's a wall tie inspection. They may have damp patches inside and some of the ties may have mortar on them which will cause the damp to cross the cavity and onto the inside wall or walls. Often comes from the brickie not putting something in the cavity to catch any mortar that can fall during the build. Done this type of inspection myself on a number of occasions but 20 years ago we used to used to knock out a brick here and there from a corner and put torch in to see where the problem may be then take out brick or 2 in right spot and sort it out.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.