External Plug Socket

[raybush]

I want to wire in an External plug socket (Garden) to power the mower and any other bits and bobs as used in the garden ,as i'm fed-up with constantly running long extension leads .
What I want to do is to run a power source (plug and cable)from an unused socket outlet in my utility room through the external wall and into the back of a External plug socket .This will be on my lower floors fuse and would also be protected by the 13amp plug .I've done work to my power supplies over the years and just wondered if this would comply ,I know it's not a rewire ,but just wanted to make sure that it sounds ok.
Regards

[Zacs-Master]

What do you mean by 'protected by the 13a plug' ?

[raybush]

I wanted to run a supply from an unused socket outlet and was just going to used a 13amp plug and suitable twin and earth and run it into the back of the new external socket outlet.

[Zacs-Master]

Please see 'before you start':
http://www.diy.com/help-ideas/how-to-add-an-external-power-supply/CC_npcart_400162.art

[raybush]

OK . Thanks for the link .I've had a read and think that what I intend to do will comply ,i'll do the job and have my Elect man check it out.