Quizzes & Puzzles0 min ago
Electric Socket
22 Answers
Some years ago an electrician installed in my living room a socket just meant for light wattage as in a lamp or hair tongs. It is not strong enough for say a vacuum cleaner. Can my handyman strengthen this I am fed up with trailing an extension cable around
Answers
Best Answer
No best answer has yet been selected by jennyjoan. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Does your socket look like this one?
Amazon.co.uk User Recommendation
Amazon.co.uk User Recommendation
Sorry, forgot the picture:
Amazon.co.uk User Recommendation
Amazon.co.uk User Recommendation
Sockets don't have a maximum power rating, per se. (Well, not different to the maximum 13A load that they're designed for, anyway). So it must be the cabling to the socket that has a restricted power load. Therefore anyone seeking to upgrade the socket's capacity would actually have to change the wiring that feeds it.
Your 'electrician' (if he really was one, as he doesn't seem to have been following the law on electrical installations in any way at all) probably tapped into a lighting circuit, rather than one designed for supplying power to 13A sockets, which would explain why he needed to caution you about the maximum load you could use the socket for.
To upgrade the socket to do its job properly, a (qualified!) electrician would need to investigate whether it was possible to add it as an extra socket on an existing ring main or to take it as a spur off one. Any difficulties involved would largely depend upon how easy or difficult it would be for him/her to access the ring main from the socket's location. (The 'electrician' who fitted the socket in the first place clearly didn't think that it would be an easy task!).
This picture might help to explain things:
https:/
The person upgrading the socket would need to either wire it in as part of an existing ring main or to run it as a spur from a socket on the ring (but not from a socket which is itself a spur). That would be quite likely to involve lifting floorboards and/or accessing a ceiling void and/or chasing a cable into a wall in order to do the job properly. (It all depends upon where your existing ring main wiring goes and how easy it would be to connect it up to the socket).
Your 'electrician' (if he really was one, as he doesn't seem to have been following the law on electrical installations in any way at all) probably tapped into a lighting circuit, rather than one designed for supplying power to 13A sockets, which would explain why he needed to caution you about the maximum load you could use the socket for.
To upgrade the socket to do its job properly, a (qualified!) electrician would need to investigate whether it was possible to add it as an extra socket on an existing ring main or to take it as a spur off one. Any difficulties involved would largely depend upon how easy or difficult it would be for him/her to access the ring main from the socket's location. (The 'electrician' who fitted the socket in the first place clearly didn't think that it would be an easy task!).
This picture might help to explain things:
https:/
The person upgrading the socket would need to either wire it in as part of an existing ring main or to run it as a spur from a socket on the ring (but not from a socket which is itself a spur). That would be quite likely to involve lifting floorboards and/or accessing a ceiling void and/or chasing a cable into a wall in order to do the job properly. (It all depends upon where your existing ring main wiring goes and how easy it would be to connect it up to the socket).
Since I am pretty handy TTT - I put the fuse in the little box under the stairs - over the years I have become quite adept at this. A fuse for cooker, separate one for lights upstairs, one for everywhere for goodness sake.
And I have been a very bad girl over the years - I run out of fuses one time and I wrapped fuse wire whatever amp I needed - 5amp, 13amp and I think 30amp fuse round the "broken" fuse until I got a new one. It done the trick for that time only.
And I have been a very bad girl over the years - I run out of fuses one time and I wrapped fuse wire whatever amp I needed - 5amp, 13amp and I think 30amp fuse round the "broken" fuse until I got a new one. It done the trick for that time only.
Latest Posts
Quizzes & Puzzles13 mins ago
Quizzes & Puzzles15 mins ago
Crosswords20 mins ago
Quizzes & Puzzles102 mins ago
