Road rules1 min ago
Washing Machine Drawer
6 Answers
When I put Powder or Liquid into the Washing Machine drawer, it doesnt go into the machine and at the end of the cycle the clothes have just been washed in water and with all the powder/liquid gunged up in the drawer - what is the problem?
Answers
Best Answer
No best answer has yet been selected by rebecca-h. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.you will probably find that there are two compartments for the washing powder or liquid. Depending on what wash is selected from the programme it will fill one of the two compartments to take down the powder or the liquid, I think from the sound of it you are filling the compartment for a hot wash and the selecting a cooler wash cycle. Try using the other compartment and see if that helps, if it doesn't, I don't know what to suggest I'm afraid.
What you have to do is use the machine empty, make it start filling and then slightly open the soap drawer just enough to see if the water is actually going in the correct compartment. If it is not then disconnect the power supply, remove the top of the machine and inspect the top of the soap container, on most machines there is a thin wire rod connecting from this to the program controller. This wire rod moves the water to go to the correct compartment for each part of the cycle, if it breaks or falls off, then the water will go in only one compartment and it might be the wrong one for your cycle.
If you can't fix it or dont want to open the machine then look to see which compartment the water goes to and then put your powder in that one only.
If you can't fix it or dont want to open the machine then look to see which compartment the water goes to and then put your powder in that one only.
If this doesn't work, see if you can buy one of those plastic ball-type containers with an opening into which you pour your washing machine liquid and then put it in the machine with your clothes. (They were supplied by the washing machine power/liquid manufacturers). I always use this method now as previously I found my washing machine drawer never completely emptied of soap and became rather yukky.