ChatterBank2 mins ago
gas meters
Answers
No best answer has yet been selected by allotment10. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.There is a BIG clue in your question. Your meter has been converted from imperial to metric.
The little digits go round each time a specific volume of gas is used. In the case of your new meter, it is measuring a metric volume of gas that is smaller than that measured by your old meter, hence the digits roll by at a quicker rate than before.
For example;
You old meter probably measured in hundreds of cubic feet (cu.ft.). Let's say you used 10,000 cu.ft. of gas, meaning your meter would have 'clicked round' a hundred times.
When you get your gas bill, they convert this figure to cubic metres (m�) by multiplying your 10,000 cu.ft by 0.02832. This means you have used 283.2 m� of gas.
Your new metric meter is probably measuring in cubic meters, so if you used the same volume of gas (283.2m�), it will 'click round' 283 times.
In both cases, you have used exactly the same amount of gas, but one is measured using an imperial meter (100 'units'), the other a metric (283 'units'). When you receive your new bill, they will know that you have a metric meter, and so the imperial-to-metric conversion is not included.
Once the gas board have the volume of gas used, they work out the average calorific value (ie the amount of energy) of the gas supplied during that period (as it can vary), and finally charge you according to the energy you have used by converting to KiloWatt hours (KWh)