ChatterBank0 min ago
Water gurgling
4 Answers
When flushing the toilet the water seems to gurgle and sometimes spits up out of the bath and shower plug holes, it also flushes away slowly, this seems to be worse just after emptying the bath water. Any ideas how this can be solved ?
Answers
Best Answer
No best answer has yet been selected by YorkieJohn. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.This could also be caused by poor plumbing in the sense of a poorly planned/executed installation.
We have the same (to a smaller degree) interaction between bath & washbasin. Emptying one will cause the other to gurgle and spit. Ours is caused due to the layout we wanted, the outlets are combined into one pipe and the combined wastepipe doesn't have quite enough fall on it to drain rapidly in the right direction.
We have the same (to a smaller degree) interaction between bath & washbasin. Emptying one will cause the other to gurgle and spit. Ours is caused due to the layout we wanted, the outlets are combined into one pipe and the combined wastepipe doesn't have quite enough fall on it to drain rapidly in the right direction.
Both of the above could be right - the key is in whether it has always done it, or whether it has started doing it and gradually got worse. If the former then Catso is probably right in that it is poorly designed pipe layout. If the latter, the pipes have gradually and partially blocked up - as per Theren.