Donate SIGN UP

Knocking down a supporting wall

Avatar Image
fairy! | 10:04 Wed 30th Aug 2006 | Home & Garden
2 Answers
I have a Victorian terraced house with two downstairs reception rooms. If I wanted to knock through, what sort of cost am I looking at?
Just a ballpark-figure... am I looking at a thousand or ten-thousand??
I think it is probably a supporting wall, & it has plug sockets, phone socket & light fittings on it, if that makes a difference.
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by fairy!. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Around �2500 from memory. About �200 for building control and the same again for structural engineer to give you measurements of RSJ. RSJ cost around �150 (I think) and then hiring supports was only a few quid. Mainly then builders time - should be around 2 days work (that depends on where you are in the country). Skip hire to get rid of the bricks. Then plastering and decorating etc. The more you can do yourself, the chaper it is (eg putting bricks into skips - backbreaking work but cheaper)
I would say �1k-�2k, depending upon the size of the wall (or 'hole' required), what is on/in the wall and what's above it.

1 to 2 of 2rss feed

Do you know the answer?

Knocking down a supporting wall

Answer Question >>