Philips electric shaver 6600 ..

[Quassia]

I just dropped it & the heads come off and all the wheels in the head fell out. How does it go back together?

[factor-fiction]

I assume you've never had to remove all these parts to clean it then.
You should have 6 round things with 'spikes' on. these will go inside thress round pieces that have a rim. These then fit inside a plastic piece. Then put the lid piece on. Trial and error should work.

[ChuckFickens]

http://download.p4c.p...6940lc_33_dfu_aen.pdf

[Old_Geezer]

Yes I usually find trial and error either works, and makes me more knowledgeable: or it doesn't and I have to buy anew. Nothing like experience for a great way to learn.

[Quassia]

factor,
I was cleaning the head when I dropped it! I usually hold the inside of the head while I shake it and brush it out. By the way, it only has 3 rotating cogs. I've got the thing the cogs rest in back, it's the metal cogs I can't get back in!

[Old_Geezer]

IIRC when I used to have a similar round head razor, it was all pretty clear anyway. Things only fitted back one way. All held by a strange shaped metal spring.

[Quassia]

Thanks factor/chuck/old geezer ... I thought it would be simple too! It should all just slot back together ... grrr! http://www.ebay.co.uk...L&hash=item56451fda6a

[factor-fiction]

The 3 cogs with little spikes on should go upside down (spikes down) inside the other three cogs.
I find that to clean it properly I have to take it all apart and clean all theparts

[Quassia]

Sorry Chuck .. the link didn't seem to work. No worries, I have some disposable blades, thanks anyway!

[factor-fiction]

Chuck's link does work for me.
Don't give up. You have 3 cogs, 3 discs to put them in, a lid with 3 holes in and a plastic piece with 3 holes in. There aren't that many combinations to try

[ChuckFickens]

http://7-0-7.co.uk/im...nalytical/explode.jpg

[Quassia]

Oh god .. how dumb can I be! Those three siver things the cogs rest in .. I only had one, the other two had rolled under the settee! I was wondering why the cogs were falling through the holes lol! Just dawned on me looking at that pic from Ebay!! Dohhh!! Thanks everyone that answered me!

[factor-fiction]

That's a great link, chuck. That should solve it.

[Old_Geezer]

The metal cogs, I assume you mean the blades. They go first into the round head bits, blade uppermost. One per.

[Old_Geezer]

Ah that's the problem with having to do proper work between posts. New posts slip though when you get back to the thread. :-(

[Quassia]

Thank you everyone! Chuck ... it was that third part along .. the three things the cogs fit in! Two had rolled under the settee and I was wondering where the third bit went & the cogs obviously were falling through the holes!!

[Quassia]

Forgot to say! All parts back together and working now! Thank you for that link chuck! :0) I got a headache now!

[ChuckFickens]

LOL, yeah having a few bits missing will make it harder to put back together.

Ideally you are not meant to swap the cutters over between the combs as the bed into their individual pair but I guess you have no idea now which goes with which so it may feel a little rougher to use for the first few shaves until the cutters bed into their new combs.

[gingejbee]

This thread has given me such a laugh - talk about the blind leading the blind! Very entertaining. Hope all sorted and working fine. (incidentally, they're cutters and cutter guards for future reference!)

[Quassia]

No there wheels/ cogs to me ginge! ;0) Oh .. and thanks very much for resufacing this question! lol!! Grrrr !