ChatterBank1 min ago
Fan Sticking In Oven...
1 Answers
Is there anyway I can stop the fan sticking in my oven?
Once it's turning, it's absolutely fine, but it usually needs a poke to get it going.
I don't want to change it - basically because I can't! But I thought IF I could pull the oven out & take the back off (assuming I can find a screw-driver!!) could I do anything with the fan then?
Is it really that simple?
I haven't got anyone who can help so it may take a while!!!
Once it's turning, it's absolutely fine, but it usually needs a poke to get it going.
I don't want to change it - basically because I can't! But I thought IF I could pull the oven out & take the back off (assuming I can find a screw-driver!!) could I do anything with the fan then?
Is it really that simple?
I haven't got anyone who can help so it may take a while!!!
Answers
Best Answer
No best answer has yet been selected by ennersdale. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I'm no expert, but my first port of call would be to use the trusty WD40.
Most cans usually come with a straw, so you can aim your squirt quite accurately.
Hopefully you'll be able to get to the spindle of the fan, about which it rotates, and get a decent squirt in, without having to dismantle it. Give the fan a quick push round with your hand and repeat once or twice more. Leave it a while (maybe overnight) and see how it goes when you next switch it on :)
(I've noticed that you said it turns fine, once it's actually going round, so I'll assume there's nothing physically blocking its rotation).
Most cans usually come with a straw, so you can aim your squirt quite accurately.
Hopefully you'll be able to get to the spindle of the fan, about which it rotates, and get a decent squirt in, without having to dismantle it. Give the fan a quick push round with your hand and repeat once or twice more. Leave it a while (maybe overnight) and see how it goes when you next switch it on :)
(I've noticed that you said it turns fine, once it's actually going round, so I'll assume there's nothing physically blocking its rotation).