Quizzes & Puzzles1 min ago
One For The Plumbers.
15 Answers
Few months ago I fitted a push open and close click clack wash band basin waste outlet.
Takes forever for the water to drain. Google says this is normal.
Can I take the top chrome disc top out and just use a normal stopper in its place or does the sink need to come out again and replace unit with a different type of waste outlet?
Takes forever for the water to drain. Google says this is normal.
Can I take the top chrome disc top out and just use a normal stopper in its place or does the sink need to come out again and replace unit with a different type of waste outlet?
Answers
1 to 15 of 15
Best Answer
No best answer has yet been selected by needawin. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Funny you should ask that, Needy......
I need to do mine, but I keep putting it off.
I have the type with a square chrome top that you can unscrew and take off.
You may have the "pop-up" round one.
It probably seals with a couple of rubber "O" rings.
Fiddle around until you can grab the thing and pull it right out.
You will most likely find out where your hair has been going.
There are different types.
What style of basin do you have?
Inset/pedestal/one that sits on a worktop?
I need to do mine, but I keep putting it off.
I have the type with a square chrome top that you can unscrew and take off.
You may have the "pop-up" round one.
It probably seals with a couple of rubber "O" rings.
Fiddle around until you can grab the thing and pull it right out.
You will most likely find out where your hair has been going.
There are different types.
What style of basin do you have?
Inset/pedestal/one that sits on a worktop?
Thanks to all who responded.
To answer all.
Waste flow was perfect before I fitted the new one. Waste pipe underneath cleaned before fitting new one.
It's a pedestal type basin.
Have tried to remove the silver top of the new one without success.
Have tried to unscrew, pull up with no success.
Don't want to damage anything.
Any ideas. Maybe this is a type where the top part does not disconnect until the complete unit is removed!
To answer all.
Waste flow was perfect before I fitted the new one. Waste pipe underneath cleaned before fitting new one.
It's a pedestal type basin.
Have tried to remove the silver top of the new one without success.
Have tried to unscrew, pull up with no success.
Don't want to damage anything.
Any ideas. Maybe this is a type where the top part does not disconnect until the complete unit is removed!
Nothing wrong with that one. I've fitted many of them.
I can only think that it is stuck down. There's probably a rubber O-ring inside which does the sealing.
It must surely be binding on the o-ring.
It should pop up a fair distance to let the water out. I guess it's not doing that. When it's up, you should be able to grab it easily to rotate it or unscrew it.
In your position, i would unscrew the whole waste and take it out to inspect. With a traditional pedestal type, you can do that without having to remove the basin from the pedestal.
While we're at it. Are you sure you wanted an "unslotted" one? Pedestal basins usually have an overflow.
I can only think that it is stuck down. There's probably a rubber O-ring inside which does the sealing.
It must surely be binding on the o-ring.
It should pop up a fair distance to let the water out. I guess it's not doing that. When it's up, you should be able to grab it easily to rotate it or unscrew it.
In your position, i would unscrew the whole waste and take it out to inspect. With a traditional pedestal type, you can do that without having to remove the basin from the pedestal.
While we're at it. Are you sure you wanted an "unslotted" one? Pedestal basins usually have an overflow.
This is bugging me :o(
I've had a word with m'colleague.
Rather than being stuck down... we reckon you've fitted it without adjusting it first. It's just a threaded rod. You lift the thing out, and keep turning it until it's in the right position.............. that is... pushes down enough to seal, and pops up enough to let the water out.
These things are "easy-clean". Put a screwdriver blade under the lip and give it a heave.
Don't forget the "slotted" question though.
I've had a word with m'colleague.
Rather than being stuck down... we reckon you've fitted it without adjusting it first. It's just a threaded rod. You lift the thing out, and keep turning it until it's in the right position.............. that is... pushes down enough to seal, and pops up enough to let the water out.
These things are "easy-clean". Put a screwdriver blade under the lip and give it a heave.
Don't forget the "slotted" question though.
1 to 15 of 15
