Computers1 min ago
Petrol Pumps
23 Answers
How do you work the petrol pump so that you can leave it filling the tank without you needing to hold the trigger all the time?
I've seen the clip on the trigger but can't figure out how to work it. Am assuming it'll unclick itself when the pump clicks to say the tank is full?
I've seen the clip on the trigger but can't figure out how to work it. Am assuming it'll unclick itself when the pump clicks to say the tank is full?
Answers
Best Answer
No best answer has yet been selected by wilsarnie. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
My other half has Arthritis and uses a fabulous little device called Easifuel that you just wedge in the trigger.
It costs �2.99 from http://www.easifuel.org/
and is endorsed by several disabled groups.
It costs �2.99 from http://www.easifuel.org/
and is endorsed by several disabled groups.
I work in a petrol station and we don't switch the pump on if the customer is not holding the handle as it is to prevent slop over or the nozzle coming out and causing a spill. It can be a big clean up operation if too much fuel goes on the forecourt and obviously a fire hazard as some people become complacent and think the guidelines are a load of rubbish. Just saves everyone a whole load of hassle if the pumps are used correctly. Also the customer may be obliged to pay for the spilt fuel!!!