Quizzes & Puzzles0 min ago
Coaxial connections
8 Answers
In my previous home there was a coaxial/fm socket in the wall so all i had to do was plug my coaxial cable from my t.v in and i had a perfect picture.
In my new place there is'nt such a socket, i know these can be bought chealply for about 2 pounds but how do you install them? And how do you connect it? Do i need to get an electrician to do it?
I am fed up with a crap picture on my t.v.
Thanks
In my new place there is'nt such a socket, i know these can be bought chealply for about 2 pounds but how do you install them? And how do you connect it? Do i need to get an electrician to do it?
I am fed up with a crap picture on my t.v.
Thanks
Answers
Best Answer
No best answer has yet been selected by stressed out. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Is there an aerial coming into your house though ?
This plugged directly into the back of the tv should give you a decent picture. The socket just connects to the aerial wire and just looks neater when there is no tv there.
It's basically just a femal connector instead of the male connector on the normal aerial wire that would enter your house.
Hope that this makes sense.
This plugged directly into the back of the tv should give you a decent picture. The socket just connects to the aerial wire and just looks neater when there is no tv there.
It's basically just a femal connector instead of the male connector on the normal aerial wire that would enter your house.
Hope that this makes sense.
I'm a bit confused.
The socket in your old house would have been connected, by coaxial cable, to an aerial (which was probably on the roof but might have been in the attic).
If your new home has got an aerial on the roof (or in the attic) with a lead feeding into your living room (or wherever else your TV is) then re-routing the cable via a wall socket won't improve the signal. (You could try a signal amplifier but it's usually best to get a better aerial).
If you've not got an aerial at all then, obviously, you need to get one fitted. Unless you've got access to ladders (and are happy working at heights) this isn't really a DIY job.
Whether you've already got an aerial or simply need to upgrade it, you'll probably be best advised to seek the services of a prodessional. Look under 'Aerial services & supplies' in Yellow Pages.
Chris
The socket in your old house would have been connected, by coaxial cable, to an aerial (which was probably on the roof but might have been in the attic).
If your new home has got an aerial on the roof (or in the attic) with a lead feeding into your living room (or wherever else your TV is) then re-routing the cable via a wall socket won't improve the signal. (You could try a signal amplifier but it's usually best to get a better aerial).
If you've not got an aerial at all then, obviously, you need to get one fitted. Unless you've got access to ladders (and are happy working at heights) this isn't really a DIY job.
Whether you've already got an aerial or simply need to upgrade it, you'll probably be best advised to seek the services of a prodessional. Look under 'Aerial services & supplies' in Yellow Pages.
Chris
Sorry, i may be confusing you. The cable is one i had before, one of those white ones, i just used to connect that to my tv then to the 'hole' in the wall but in this place i don't have that coaxial socket.
I guess i will have to look around the fronrt room for some box on the wall and see if the antenna is connected there. I do have an aeriel on the roof.
I guess i will have to look around the fronrt room for some box on the wall and see if the antenna is connected there. I do have an aeriel on the roof.
hi stressed,
what these fellow abers are saying ( to put it simply )
is, if you have an ariel, then all you need to do is take the lead from the ariel ( making sure you have the correct end on the lead
i.e male / female ) and plug it into the back of your tele, you dont need a wall socket.
hope this helps.
what these fellow abers are saying ( to put it simply )
is, if you have an ariel, then all you need to do is take the lead from the ariel ( making sure you have the correct end on the lead
i.e male / female ) and plug it into the back of your tele, you dont need a wall socket.
hope this helps.