Donate SIGN UP
Home > How it Works > Coals going white.

Coals going white.

Avatar Image
Rossy | 11:22 Fri 12th Nov 2004 | How it Works
3 Answers

The coals in my gas fire are starting to go white, how do I get them back to black?

prev Paper weights
  
next water caming from heater matrix pipe
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by Rossy. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image Ray the DJ
Use a wire brush on them, but don't rub too hard.
23:16 Fri 12th Nov 2004
Avatar Image 2nd row
 rossy, when you say " going white ", i can only presume that the black is coming off ? the whiteish you see is more than likely the original  colour of the moulded fibreglass........ if this be so, then by rubbing too hard will take off the black,  but then, time and age can be the cause ,.... local  'motorists ' shop, MATT black, heat resistant paint. remember tho' to get or keep that red, warm, real coal effect, that some areas of the mould, are that bit lighter than the black coal areas.... hope that helps,
23:15 Sat 13th Nov 2004
Avatar Image 2nd row
   oops ! sorry Rossy, notice now that yours is a gas one, mine is electric, but they both could be the same ? which i think you will find, please check first ok ? 
00:38 Sun 14th Nov 2004

1 to 3 of 3rss feed

Do you know the answer?

Coals going white.

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.