Light Marks On Car After Using Resin Polish

astraman | 02:12 Wed 08th May 2013 | Cars

3 Answers

Hi i've recently tried to use some resin polish to remove some light scratches on my cars paintwork(back mettallic).After gently rubbing in polish and hand buffing off there looked to be a good shine and scratches were vastly reduced .However when the light hits the car at certain times of the day you can notice the areas that were rubbed although its still shiny.I dont' know what i've done wrong to cause this but was wondering if i should be applying wax on these treated areas as i may have rubbed the previous wax off.Please advise as car is only a couple of years old.I aplogise for sounding such a novice in advance.

X Reg Renault Clio, Turning Over And Starting After One Or Two Tries But Not Starting First Time

1998 Citroen Synergie

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by astraman. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

KJN

Same on my black car, have a read of this :-

http://www.cleanyourcar.co.uk/forum/viewtopic.php?t=28

KJN

Sorry did not finish post, I used a good polish on mine ( done by hand) and then used a good quality wax, also by hand , came out about 90 per cent perfect, the wax will fill the swirl marks as much as possible, its hard work and a long process to get it 99.9 per cent which is why car detailers charge £400 upwards for a full compete job..