Religion & Spirituality1 min ago
how do i fit fiat punto 1.2 16 valve injectors
i have a 1.2 16valve fiat punto sporting on an s reg it needs the first and last injectors changing i have the parts but was wondering how much of a job it would be
Answers
Best Answer
No best answer has yet been selected by benrobs. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.for my mk2 punto (not sure if its the same)
disconnect the battery
remove air filter
depressurise fuel line
remove HT wiring (remember sequence)
remove ecu (after disconnecting relevant wiring)
remove 4 bolts holdng throttle body to inlet manifold and remove (dont loose o-ring)
remove quick-release fuel line (pinch 2 sides and pull out)
disconnect injector wiring (yellow connectors)
unscrew 2 bolts holding fuel rail and gently prise out
the injectors can then be removed by sliding off the metal clips holding them to the fuel rail and pulling them clear
not hard at all -hope this helps :o)
disconnect the battery
remove air filter
depressurise fuel line
remove HT wiring (remember sequence)
remove ecu (after disconnecting relevant wiring)
remove 4 bolts holdng throttle body to inlet manifold and remove (dont loose o-ring)
remove quick-release fuel line (pinch 2 sides and pull out)
disconnect injector wiring (yellow connectors)
unscrew 2 bolts holding fuel rail and gently prise out
the injectors can then be removed by sliding off the metal clips holding them to the fuel rail and pulling them clear
not hard at all -hope this helps :o)
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.