News1 min ago
vectra 2.5sri
how hard is it to change the filter and oil i went to halfords to buy haynes manual but they dont do one for my car ? any clues?i would like to have a go myself
Answers
1 to 8 of 8
Best Answer
No best answer has yet been selected by dazdirect. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
-- answer removed --
Another thought.
Some garages when changing the oil, syphon the old oil out through the dipstick tube.
OK. This removes the old oil but it's not the proper way.
The correct way is to run the engine until warm, Thus stirring up any rubbish and sediment in the oil and also allowing it to drain out quickly.
Then remove the sump plug, and drain oil into a container.
Two things to remember. Let the drained oil settle and check for any swarf, ( Bits of metal etc. ) , this gives an indication of the engine condition.
Secondly, Dispose of the old oil at your council tip, and don't just pour it down the nearest drain.
Oh, and don't forget to replace the drain plug. ( It happens ).
chadad
Some garages when changing the oil, syphon the old oil out through the dipstick tube.
OK. This removes the old oil but it's not the proper way.
The correct way is to run the engine until warm, Thus stirring up any rubbish and sediment in the oil and also allowing it to drain out quickly.
Then remove the sump plug, and drain oil into a container.
Two things to remember. Let the drained oil settle and check for any swarf, ( Bits of metal etc. ) , this gives an indication of the engine condition.
Secondly, Dispose of the old oil at your council tip, and don't just pour it down the nearest drain.
Oh, and don't forget to replace the drain plug. ( It happens ).
chadad
1 to 8 of 8
