Entering Megane (1.4, 1999) Radio Code

New2Quizzes | 19:52 Sun 24th Apr 2011 | Motoring

8 Answers

Having disconnected the car battery, I now need to re-enter the radio code (which I have). Unfortunately, the display on the dash is not working and I can't see to do it this way. Is there another method that does not rely on the display panel? Thanks for any help.

ford focus water leak

Nissan terrano 3.0 di

Answers

1 to 8 of 8

Best Answer

No best answer has yet been selected by New2Quizzes. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

douglas9401

Hi, if the display is at the top of the dash then there is a red plug under the cowling with a locking bar that secures it. This may have come adrift (it doesn't take much). The cowling just pops off.
If the display is on the radio it's sometimes made visible by turning on the radio and shining a light source on it at just the right angle.
If neither of those two apply then Renault codes start with 0000 so you know where you're starting from. Each click on the column mounted thumbwheel is one digit or each press of buttons 1 - 4 respectively will register one digit. To move between each of the four zeros consult your handbook.
Hope this helps.

New2Quizzes

Question Author

Thanks for your suggestion. The display is in the dash. Will try tomorrow.

AlBags

My runabout is a 2000 Megane. Make sure you enter each one with that lower button on the stalk switch.
Come back if a problem .. but help is here ....
http://www.renaultfor...owthread.php?t=108086

New2Quizzes

Question Author

Thanks for the help. I'd looked at that forum earlier, but all answers seem to rely on the display in the dash being present ...

AlBags

Like this one? ..
http://cgi.ebay.co.uk...M&hash=item2a0f8598ff

New2Quizzes

Question Author

Like that one, yes. Meanwhile, problem solved. Thanks again to all who offered suggestions.