Donate SIGN UP

Stuck hand brake

Avatar Image
jo90 | 00:26 Fri 19th May 2006 | Motoring
6 Answers
My sons car has been sitting on the drive for 6 months and he left the handbreak on.It's now locked solid. How do I release it?
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by jo90. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
release the handbrake, start the car and rock the car with 1st and reverse gear. the brake is stuck due to fresh corrosion between the shoes and the drum. after a couple of to and fro movements the brake will release

Make sure the levers are operating on the backplates when you pull the handbrake lever on and off - if these are ok then you may need to shock the drums with a few heavy hammer blows to release the shoes. It's better to remove the road wheels to do this. The drums won't break so don't be afraid to give them a good whack.

Just realised - i'm assuming it's drums on the rear of your son's car - rear discs are a different story.
would still have a drum brake set-up under the rotor.
I can't quite agree that hitting your brake drums with a hammer will not break them, most are cast iron which can be brittle, I suggest that you hit the drums with either a big rubber hammer or use a block of hard wood on the drum and hit that with the hammer.
Been hitting 'em hard for 20 years and never broke one yet ! Rubber hammer best used for beating the missus.

1 to 6 of 6rss feed

Do you know the answer?

Stuck hand brake

Answer Question >>