Film, Media & TV0 min ago
1993 Range Rover Classic that wont fire up
i have replaced the heater matrix on the car, i took it for a drive and the heater was working fine, after 10 miles the hazards came on and the engine was reving up and down in time with the hazard lights, i switched it off and it would not fire up again, now everytime i try to start it up it doesnt start and the hazards come on. I have had an auto spark have a look and he suggested the ecu alarm, i replaced this and the problem is still there. I have not replaced the 2 relays that work in conjunction with the alarm as i dont want to waste any more money for the problem to still be there. Can you help?
Answers
Best Answer
No best answer has yet been selected by rangie. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.last thing you need when you have a problem some smart arsed remark.
however have you tried the engine control relay
positive should be term 86
negative should be term 85
there should be a resistance between these of approx
50 ohm
teminals 30 & 87 should be open circuit
if a supply is put across 85 & 86. then 30 & 87 should be short circuit
however have you tried the engine control relay
positive should be term 86
negative should be term 85
there should be a resistance between these of approx
50 ohm
teminals 30 & 87 should be open circuit
if a supply is put across 85 & 86. then 30 & 87 should be short circuit
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.