Donate SIGN UP

pug 306 td starting probs

Avatar Image
wallis1007 | 21:22 Sat 03rd Mar 2007 | Motoring
2 Answers
Never had a problem before today with this car. Today however It refused to start. The glow plugs have been replaced in the last 6 months, the filters have been changed recently. I used a bit of easy start this morning and it started almost straight away. Once it started it ran ok and started every time after that. It seems to be the first start of the day. There has been no warning of this problem and the drives perfectly once it starts. Could this be caused by the injectors or maybe an air getting in the fuel system. TIA
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by wallis1007. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If air was getting in the system then it wouldn't run very well hot or cold, you could try the relay that feeds power to the glow plugs or get a voltage tester so when the ignition is on make sure there is 12 volts getting to each glow plug....
this is inherent prob on pug tds - yes relay is at fault . as could be injectors -(the latter too expensive to fix) .When the glow plug light goes off wait about 10 secs and then start

1 to 2 of 2rss feed

Do you know the answer?

pug 306 td starting probs

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.