Crosswords1 min ago
CO emmission problems
My Golf 1.4cl failed the MOT due to the CO emissions what could be the problem?
Answers
No best answer has yet been selected by edwards. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.CO stands for Carbon Monoxide. It is a by-product of burning fossil fuels. You don't say what year your Golf is and whether it has a catalytic converter? Is it fuel injected? It would depend on whether it's fuel injected or carburetted on where I would check first. Here are some things you can do yourself (if you're good at DIY).
Check your air filter. If it's too dirty you're engine is starving of air and will make your fuel richer and increase your CO.
Check your spark plugs. Too wide a gap, or dirty plugs, will give a poor spark and will not burn the mixture as efficiently as it should do. If mixture not burning properly you'll have unburnt fuel going through your exhaust causing higher CO.
Vacuum pipe off airfilter/inlet manifold etc. Can effect running of engine and ECU will compensate altering CO level.
Blocked breather pipe/breather cap. Can affect CO readings.
Faulty oxygen sensor (if catalyst fitted) giving incorrect signals, or default signal, to ECU. Can cause higher CO.
If you car has a carburetor then it may need tuning and the air/fuel mixture adjusting. This will need to be done by a garage. It's usually better done after new air filter/spark plugs fitted.
If car is fuel injected, could be fault with Engine management system, or Engine Control Unit (ECU) giving wrong inputs to engine. Will most likely need garage tuning.
Think that's the main things!
So, what year is your car? Is it fuel injected? Is it serviced regularly?
Yeah, the lambda is the Oxygen sensor that I mentioned. It basically measures the amount of oxygen passing through the exhaust and is situated as close to the engine as possible. It tells the engine management system how much oxygen content the exhaust gases have and then compensates so that the engine 'air to fuel ratio' is maintained at the most efficient 14.7 parts air to 1 part fuel (14.7:1). Obviously if it isn't working then it's either supplying the wrong data or the engine management system automatically switches to default mode which is okay, but not 100% accurate!
Hope it passes soon!
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.