Donate SIGN UP

saab 93

Avatar Image
glesgafergie | 06:57 Thu 06th Jan 2011 | Motoring
5 Answers
glesgafergie SAAB 93 WIPERS
My 07 saab 93 windscreen wipers are resting in the up position. when i turn them on they go down then up and stop in the up position, is there an easy way to reset them.thanks.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by glesgafergie. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
tried removing the fuse for a few seconds? it might be when the power is restored the module will go through the learing mode .Worth a try
Undo your wiper blades from the knurled drive knob,reset your blades to where you want them to stop,then tighten back up.Five minute job
Question Author
But the blades are going down then up. if i loosen them and put them to bottom wont they go down towards the bonnet first. scared to try in case i flump it up
that should have read 'learning mode'
Same principle ,put your wipers flat on the windscreen bottom with free end to the right,make sure your left one is set an inch above the right one then tighten.

1 to 5 of 5rss feed

Do you know the answer?

saab 93

Answer Question >>