Quizzes & Puzzles6 mins ago
Modern Tools
Hammer - In ancient times a hammer was used to inflict pain on one's enemies. Modern hammers are used to inflict pain on oneself.
Screwdriver - The drink ordered at the local bar after you call in a professional repairman to undo the £500 in damage you did while trying to change out a light socket with your handy screwdriver.
Phillips screwdriver - The bar drink that you order when the damage estimate is over £1,000. Contains twice the vodka.
Pliers - A device used to extend your reach the necessary few inches when you drop a one-of-a-kind screw down behind the new wall it took you two weeks to install.
Electronic Stud Finder - An annoying device that never goes off when you point it at yourself.
Halogen Light - A work light that lights up your back garden with the incandescence of a football stadium, causing you to cast a heavy shadow over the area you're working on so that you need to use a flashlight anyway.
Cordless Drill - A device that lessens your chance of electrocution 90% over a standard plug-in tool.
Cordless Telephone - The handyman's 999.
Air Compressor - A mechanical device similar in principle to harnessing the power of your mother-in-law's nagging complaints and using the resulting airflow to blast old paint off the side of the house.
Chain Saw - Allows you to cut your way out of the shed that you accidentally built completely around yourself.
Vice Grips - A pair of helping hands that doesn't criticise the job you're doing or offer advice.
Screwdriver - The drink ordered at the local bar after you call in a professional repairman to undo the £500 in damage you did while trying to change out a light socket with your handy screwdriver.
Phillips screwdriver - The bar drink that you order when the damage estimate is over £1,000. Contains twice the vodka.
Pliers - A device used to extend your reach the necessary few inches when you drop a one-of-a-kind screw down behind the new wall it took you two weeks to install.
Electronic Stud Finder - An annoying device that never goes off when you point it at yourself.
Halogen Light - A work light that lights up your back garden with the incandescence of a football stadium, causing you to cast a heavy shadow over the area you're working on so that you need to use a flashlight anyway.
Cordless Drill - A device that lessens your chance of electrocution 90% over a standard plug-in tool.
Cordless Telephone - The handyman's 999.
Air Compressor - A mechanical device similar in principle to harnessing the power of your mother-in-law's nagging complaints and using the resulting airflow to blast old paint off the side of the house.
Chain Saw - Allows you to cut your way out of the shed that you accidentally built completely around yourself.
Vice Grips - A pair of helping hands that doesn't criticise the job you're doing or offer advice.
Answers
1 to 4 of 4
Best Answer
No best answer has yet been selected by marval. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
I found this a few years ago:
Need A Tool?
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted project which you had carefully set in the corner where nothing could get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, 'Oh damn'
SKIL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation of blood-blisters
BELT SANDER:
An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board principle... It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race. It's best use is for igniting new seat covers.
TABLE SAW:
A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent to the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use.
SON OF A *** TOOL :
Any handy tool that you grab and throw across the garage while yelling 'Son of a ***' at the top of your lungs. It is also, most often, the next tool that you will need, and at times must be retrieved from across the road.
Need A Tool?
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted project which you had carefully set in the corner where nothing could get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, 'Oh damn'
SKIL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation of blood-blisters
BELT SANDER:
An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board principle... It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race. It's best use is for igniting new seat covers.
TABLE SAW:
A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent to the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use.
SON OF A *** TOOL :
Any handy tool that you grab and throw across the garage while yelling 'Son of a ***' at the top of your lungs. It is also, most often, the next tool that you will need, and at times must be retrieved from across the road.
-- answer removed --
1 to 4 of 4
Latest Posts
Quizzes & Puzzles37 mins ago
Could All Help With Signing My Petition
Seasonal50 mins ago
Quizzes & Puzzles50 mins ago
Quizzes & Puzzles55 mins ago
Crosswords59 mins ago
