News1 min ago
Scanning problems
I have an Epsom DX 3800 which prints fine but as to scanning I get a box coming on --Epsom Scan cannot be started. I have reloaded the disc and tried but does not answer the problem. Do I cut my loss and get another scanner and can that run alongside my printer.
Thanks for any assistance
Thanks for any assistance
Answers
Best Answer
No best answer has yet been selected by browndmb. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Read the last few posts here:
http ://w ww.p chel pfor um.c om/x f/th read s/ep son- styl u-dx 3800 -sca nnin g.12 0616 /
I think the solution suggested is to replace the drivers with vista drivers.
http
I think the solution suggested is to replace the drivers with vista drivers.
Try this:-
What should I do if I'm getting a Epson Scan Cannot Be Started message?
This message occurs when the incorrect settings are selected in EpsonScan and the MFP Manager setup is not complete. You can resolve this message by doing the following:
1.Launch Epson Scan. (Start > All Programs > Epson Scan > Epson Scan Settings)
2.Be sure EPSON "CX9300F/CX9400F..." is selected in the Select Scanner box.
3.Make sure that Connection: Local is selected.
4.Verify Scanner Status: "Scanner is ready."
5.Click OK.
6.Double-click the MFP Manager icon in the Windows taskbar.
7.Select your all-in-one in the MFP Server List and click Connect.
8.Attempt scanning.
When you are done, select your all-in-one in the MFP Server List and click Disconnect.
What should I do if I'm getting a Epson Scan Cannot Be Started message?
This message occurs when the incorrect settings are selected in EpsonScan and the MFP Manager setup is not complete. You can resolve this message by doing the following:
1.Launch Epson Scan. (Start > All Programs > Epson Scan > Epson Scan Settings)
2.Be sure EPSON "CX9300F/CX9400F..." is selected in the Select Scanner box.
3.Make sure that Connection: Local is selected.
4.Verify Scanner Status: "Scanner is ready."
5.Click OK.
6.Double-click the MFP Manager icon in the Windows taskbar.
7.Select your all-in-one in the MFP Server List and click Connect.
8.Attempt scanning.
When you are done, select your all-in-one in the MFP Server List and click Disconnect.