How it Works8 mins ago
Self winding watch.
15 Answers
Good evening,
I have had a brand new Tissot self winding for a month now.
I keep a close check on the accuracy of the time keeping.
I find it loses ONE minute in a week
IS THIS GOOD OR BAD for a self winding watch.
Thank you in advance for any information.
Tobergill.
I have had a brand new Tissot self winding for a month now.
I keep a close check on the accuracy of the time keeping.
I find it loses ONE minute in a week
IS THIS GOOD OR BAD for a self winding watch.
Thank you in advance for any information.
Tobergill.
Answers
Best Answer
No best answer has yet been selected by tobergill. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
The accuracy of the watch depends on the movement and on the individual habits of the wearer and can therefore vary. A qualified TISSOT watchmaker can adjust the precision of a watch to within the TISSOT tolerances.
The majority of watches that do not have a chronometer certificate have average precision tolerances of between -10/+30 seconds per day. To earn the title of chronometer, the mechanical movement's average daily variation in rate must be between -4/+6 seconds per day.
http://support.tissot.ch/?mod_faq
The majority of watches that do not have a chronometer certificate have average precision tolerances of between -10/+30 seconds per day. To earn the title of chronometer, the mechanical movement's average daily variation in rate must be between -4/+6 seconds per day.
http://support.tissot.ch/?mod_faq
-- answer removed --
A minute a week difference isn't too bad. In general modern quartz driven watches are more accurate than mechanical watches including chronometer certified watches. So often cheaper is more accurate. 99.9 accuracy loses one and a half minutes a day. A good comparison chart is here http://www.chronocent...atches/accuracy.shtml
-- answer removed --
As per Ratter an average of less than 10 secs a day slow is within tolerance for most mechanical movements, most manufacturers will tend to be fast rather than slow so a little unusual there. However pretty well all manufacturers will adjust to within tolerance within the guarantee period and I would suggest that being on the outer limits of the 'slow' side would entitle you to have this done. That being said,no-one should buy a mechanical watch for accuracy over a quartz, there's just no competition, said the man with one quartz and twenty six mechanicals ;-)