Hkc Alarm

[martinjr]

I got a HKC Quantum70 wireless alarm system installed a few months ago. I recently purchased 2 wireless sensors and an extra keyfob but so far I failed to install them as it is difficult follow the instructions. Is there someone out there who can provide me with the few steps required to add:

- 1 x keyfob
- 2 x sensors

Thank You
martinjr

[Buenchico]

I'm sorry that this isn't much of an answer. (I've read through the user manual and got nowhere). But, if you're stuck, I suggest phoning HKC Support on 0800 111 4599. (If you're in Ireland, try 01 456 7007). Or try an email to [email protected]

[YourManLynch]

Enter the Engineers code and then authorise it with the User code.
pull the white tag out from the battery on the two Sensors.
at the alarm panel, press "# next" until devices menu appears on the display,
press "Rec Yes" to select Devices menu,
the Sensors and the key FOB are RF devices, so press "Rec/Yes" again to select,
Press "Rec Yes" again for Add & Identify RF Devices.
The system will then scan for devices and display how many it has found.
when it has found all the new devices press "Play Quit",
it will then say are you sure, press "Play Quit" again.
keep pressing "# Next" until you have reached your last identified zone. eg if you currently have 7 zones, go to number 8 for the new one.
on the sensors you'l see a red tamper button, press this and the External bell will ring to let you know the panel is communicating with the sensor.
the system will then automatically continue onto the next zone eg 9. Repeat the red button process for each new sensor.

[YourManLynch]

To add the key Fob...
Enter the Engineers code and then authorise it with the User code.
At the alarm panel, press "# next" until devices menu appears on the display,
press "Rec Yes" to select Devices menu,
the key FOB is an RF devices, so press "Rec/Yes" again to select,
Press "Rec Yes" again for Add & Identify RF Devices.
Press # next untill Add&ID KeyFob appears.
When the alarm panel is finished scanning, press any button.
the External bell will ring to let you know the panel is communicating with the FOB