ChatterBank2 mins ago
PSTN and Data Communications
I'm doing research into a paper on the issues of using a PSTN (Public Switched Telephone Network) for data communications. I have identified a number of areas where I believe that there are major issues. In no order, these are:
1) Communications issues maybe outside of the end user's control - it may be with the PSTN, not their network, in which case, it can be difficult to get issues prioritised and fixed.
2) Bandwidth changes throughout the day due to consumer demand.
3) The data is slower through the last section from exchange to end user, since this typically is an analogue system. This means that data travels at the rate of the lowest bandwidth in the system.
4) The analogue portion of the line is more susceptible to noise, meaning signal to noise may increase, resulting in lower bandwidth.
5) PSTN reserves a dedicated 64kb for voice channels, therefore restriciting available bandwidth for data coms. IP only requires 8kb, therefore IP more efficient.
6) The signal may need to be converted from analogue to digital at more than one point (i.e switches). At each change, it it is possible that noise may be introduced, thus attenuating the signal.
Can anyone suggest any other major areas I need to research?
Many thanks!
Answers
No best answer has yet been selected by WaldoMcFroog. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Copper. Quite a few phone lines are still copper I think, though mainly out in the sticks.
Technologies not offered by PSTN like Frame Relay.
Little article on Frame Relay here :
http://www.argreenhouse.com/papers/jlj/interop99.pdf
1. http://en.wikipedia.org/wiki/Telecommunication
2. http://en.wikipedia.org/wiki/Pbx
3. http://en.wikipedia.org/wiki/Pstn
4. http://unifiedcommunic.livejournal.com/
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.