What If The Labour Party Got Rid Of...
Politics2 mins ago
Friends PC keeps shutting down on him, i personally think it could be overheating. AMD K7 Duron 1000mhz, after running for 5 -10 mins bios states CPU temp - 89f
System temp - 82f
CPU fan speed - (varies from) 5075; 5113; 5152rpm
System fan speed - 0rpm
+12v - 12.352v
-12v - -11.393v
Surely it shouldn't be running at this temp?! any ideas on rectifying this prob would be great help. Also, there doesn't seem to be a CPU temp alarm...should there be?
No best answer has yet been selected by blueoval. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I would agree, clean out all the fans and the heat sink above the CPU. Do this outside.
Loosen the dust round the fans and heat sink carefully with a non metalic object (drinking straw, wooden toothpick etc)
Suck out the dust with a vacuum cleaner (non metal noozle) and or blow it out with a hair drier.
Turn it on OUTSIDE with the covers off to remove all the dust and to make sure all the fans are still working.
Ensure everything is reseated (cards, fans etc) then put covers back on.
Does seem too hot, running a CPU without enough cooling could damage it, consider upgrading the CPU fan/heatsink if cleaning doesn't improve the situation.
Also, I use a free utility called Speedfan, available from www.almico.com/speedfan.php, it monitors the CPU temp, fan speeds, motherboard temp, hard drive temp etc.
I must agree with everythin that Rojash says here.
To take a case in point, I had a problem with one of my newly-built PCs a few weeks ago which kept crashing for no apparent reason. All the hardware tested out OK so I reformatted and added drivers individually over the course of a week until I replicated the fault and finally traced it to the drivers of a D-Link wireless USB Access point which came with my modem/router.
I substituted it with a Belkin PCI card which obviously used different drivers. Problem solved.
The moral, with this sort of problem, be systematical with your approach to it, don't be sidetracked by focussing on one possibility as you have here and be patient.