Science0 min ago
Epson c44 printer
7 Answers
i have an Epson printer and i have had a message appear that says 'parts of your printer have reached the end of their life.' Contact your local dealer for service and repair. However when i phoned them they said that it was uneconomical to repair a printer and it would be cheaper to buy a new one. Is this correct or are they just trying to make a sale?
Answers
Best Answer
No best answer has yet been selected by phiz. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Yes, it might be cheaper to buy a new printer but as Epson see fit to have built-in redundancy in their printers (me on my soap box!) - sometimes within warranty periods (when they might offer you a re-conditioned printer) - I think you should either try this site:-
http://ssclg.com/epsone.shtml
to download their 'reset' utility
Your printer is mentioned but with the following condition:-
** - NOTE! It is impossible to reset ink counters by software methods on this printer.
Use "ink freezer" function to maintain current ink level and "hot swap" to use refilled old cartridges.
OR use Google to find out how to clean out and reset the 'overflow' tank in your printer. Some sites even give a pictorial tutorial on how to do it (BTW some (?) Canon printers have the same problem but their technicians are taught how to reset the printers).
http://ssclg.com/epsone.shtml
to download their 'reset' utility
Your printer is mentioned but with the following condition:-
** - NOTE! It is impossible to reset ink counters by software methods on this printer.
Use "ink freezer" function to maintain current ink level and "hot swap" to use refilled old cartridges.
OR use Google to find out how to clean out and reset the 'overflow' tank in your printer. Some sites even give a pictorial tutorial on how to do it (BTW some (?) Canon printers have the same problem but their technicians are taught how to reset the printers).
hi i read an article a while ago that led me to believe that underneath where the ink catridges rest is basically a mop up pad that collects any surplus ink, over time it gets clogged up with ink and eventually this will stop your printer working. there is a way of fixing this problem but it sounded a little fiddly (removing a wire holder and replacing the pad) i will try to find the article and post the link later today. if your printer is an uneconomical repair perhaps you have nothing to lose in trying this!