ION Turntable

[shylock73]

I have an ION turntable to transfer vinyl to CD`s but when I`ve transferred a L.P it only plays back in mono and the sound is awful, can you advise what I should do please. TIA. I`ve also sent for a ION tape to CD machine so I hope I don`t get similar problems with that.

[ACtheTROLL]

I can't remember which windows you use
for vista - the book says
http://www.ion-audio.com/extras/miscfiles/ez/E ZVC_WindowsSettingsHelp_revG.pdf

1. Make sure your USB Turntable is connected to your computer and powered on.
2. On the Windows Desktop, click on the �Start� button (Vista logo) in the lower left-hand corner.
3. Click on �Control Panel,� which is on the right edge of the start menu near the bottom.
4. Click on �Hardware and Sound� followed by �Sound.� You may just see �Sound� if you are in classic view.
5. Click on the �Recording� tab.
6. Find the USB Turntable in the list (it will show up as �Microphone USB Audio Codec�). Click on it.
7. Click the Properties button.
8. Click on the Advanced tab.
9. In the Default Format selection, make sure that �2 channel, 16-bit, 44100Hz (CD quality)� is selected. The incorrec
default is for 1 channel.
10. Click OK.

see also
http://www.ion-audio.com/extras/miscfiles/ez/E ZVinylConverter_QuickStart_Guide_v2.pdf

[shylock73]

ACthe TROLL. As usual you`ve come up trumps, thankyou.