ChatterBank4 mins ago
My PC Monitor
1 Answers
Help
I have a Fujitsu Siemens PC Monitor - SCALEOVIEW RE19-1 and suddenly the colour on the screen has become greenish and rather hard to read and sore on the eyes. I have tried on numerous occasions to correctly set the brightness and contrast with thebuttons for the OSD menu, but without success.
Can anyone tell me of a solution for this terrible problem which I am having.
I shall be grateful to all who answer and a big 'thanks' to all.
Kind regards.
primula
I have a Fujitsu Siemens PC Monitor - SCALEOVIEW RE19-1 and suddenly the colour on the screen has become greenish and rather hard to read and sore on the eyes. I have tried on numerous occasions to correctly set the brightness and contrast with thebuttons for the OSD menu, but without success.
Can anyone tell me of a solution for this terrible problem which I am having.
I shall be grateful to all who answer and a big 'thanks' to all.
Kind regards.
primula
Answers
Best Answer
No best answer has yet been selected by primula. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Sounds like your monitor cable is loose or shot. Check both ends don't have any bent/broken pins and are firmly attached. Also try "wiggling" the cable; normally the end that goes is the end near the monitor, but try both.
If you have bent or broken pins, replace the cable. If wiggling helps, taping the cable into a position that "works" will help in the short term, but you should probably replace the cable before it drives you mad. Shop around - you can pay between �2 and �30 for a cable.
If you have bent or broken pins, replace the cable. If wiggling helps, taping the cable into a position that "works" will help in the short term, but you should probably replace the cable before it drives you mad. Shop around - you can pay between �2 and �30 for a cable.