Quizzes & Puzzles7 mins ago
Extension Sockets
9 Answers
i have a few of those socket adapters - like an extension lead but minus the lead - just plugs straight into the wall socket
however 3 of them now have started to go brown and melt around one of the pins on plug ... it says max is 3000w / 13 amp
does this mean i can only have one plug of 13 amps plugged into it? or a few of 5 or 3 amps?
i have one in the kitchen that has the toaster and a little grill in it - but would rarely use them at the same time - though occasionally may have
whats the point if you can only put one plug in? or only use one thing at a time?
one actually melted the wall socket in the bedroom in the end and ive had to replace it
how can i find one that takes more?
or am i misunderstanding?
thanks
however 3 of them now have started to go brown and melt around one of the pins on plug ... it says max is 3000w / 13 amp
does this mean i can only have one plug of 13 amps plugged into it? or a few of 5 or 3 amps?
i have one in the kitchen that has the toaster and a little grill in it - but would rarely use them at the same time - though occasionally may have
whats the point if you can only put one plug in? or only use one thing at a time?
one actually melted the wall socket in the bedroom in the end and ive had to replace it
how can i find one that takes more?
or am i misunderstanding?
thanks
Answers
Best Answer
No best answer has yet been selected by joko. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.maybe you have a faulty batch of adapters? Either that or your grill and toaster are drawing much more power than can is acceptable and you have overload.
Trybuying a new one from a reputable supplier and make sure you only use one appliance at a time. Either that or you switch the kitchen about and find a socket each for them. Share the toaster with the radio or something else that has no heating element.
Trybuying a new one from a reputable supplier and make sure you only use one appliance at a time. Either that or you switch the kitchen about and find a socket each for them. Share the toaster with the radio or something else that has no heating element.
First off, sling it and sling it now.
Next, 3kw will be the maximum load of everything you plug into it at one time, summed together. Probably wise not to go near the maximum.
You may wish to investigate what it was that caused the browning/melt. Either it is arcing inside or something is taking an abnormally high current and may have a fault.
Next, 3kw will be the maximum load of everything you plug into it at one time, summed together. Probably wise not to go near the maximum.
You may wish to investigate what it was that caused the browning/melt. Either it is arcing inside or something is taking an abnormally high current and may have a fault.
I have never understood these KW thingys, I just work on the rule not to plug more than one thing into an extension plug that heats.
ie kettle, toaster, hairdryer, little grill etc.
As regards the brown marks, that is probably scorching due to a poor connection sparking.
Sling it out and buy a new one.
ie kettle, toaster, hairdryer, little grill etc.
As regards the brown marks, that is probably scorching due to a poor connection sparking.
Sling it out and buy a new one.
check the tightness of the connections inside your plugs and as already said buy a good one
http:// www.diy .com/de partmen ts/mast erplug- 4-socke t-10-a- interna l-exten sion-le ad-8m-w hite/17 6311_BQ .prd
http://
Two things to consider here, Joko. One is that good quality double sockets are largely designed to handle a continuous load of 20 amps (total - both sockets loaded.)
But they must be of good quality. That's the second thing. There are loads of cheap imports that will not take this load without damage. Even MK advise a 20A total load.
This is in contrast to the (theoretical) notion that 2 x 13A sockets mean a capability of 26A!!!
Even without the possibility of loose connections/arcing etc, this is worth remembering.
Grills/kettles/toasters etc have relatively high-load heating elements. They should each have their own outlet.
Do consider having extra sockets fitted alongside the existing ones. A much better option.
But they must be of good quality. That's the second thing. There are loads of cheap imports that will not take this load without damage. Even MK advise a 20A total load.
This is in contrast to the (theoretical) notion that 2 x 13A sockets mean a capability of 26A!!!
Even without the possibility of loose connections/arcing etc, this is worth remembering.
Grills/kettles/toasters etc have relatively high-load heating elements. They should each have their own outlet.
Do consider having extra sockets fitted alongside the existing ones. A much better option.
To be clear it's nothing to do with the current the plug that you plug into the adapter can handle.
It's the actual power/current of whatever item you have put the plug on. These values are what you need to sum.
All your plugs may be able to take 13amps. But if each of three item take 12.5amps then that's 37.5amps (9kw) and is far too much.
It's the actual power/current of whatever item you have put the plug on. These values are what you need to sum.
All your plugs may be able to take 13amps. But if each of three item take 12.5amps then that's 37.5amps (9kw) and is far too much.
Sparks will be on to tell you I am sure. But those extension leads really are only for small loads and not good as a permanent solution. You are operating electrical goods on what is a temporary spur, which does not offer the load sharing protection that a socket in the ring main does. Do as builder says and get permanent extra sockets fitted that are part of the ring system and are of a decent quality fitting. That fishy smell you get when a socket or plug or light fitting is overheating is not an accidental result.