Crosswords3 mins ago
Help, Please! Water Coming Through Downstairs From Upstairs Bathroom!
10 Answers
Hi! Ran the bath tap upstairs. The water stopped so we turned the tap off and back on again. Nothing but we could hear water running; it was coming through the light fitting in the room below and splashing on the stone floor. I've turned the stopcock off.
I'm presuming there's a leak in the underfloor pipe that feeds the bath tap. We have no water tank - it's a combi boiler.
So my question is - can I turn the water back on and wait till morning to call a plumber or do I need an emergency plumber?
Edit - I've just turned the water back on and, so far, all is quiet but I haven't dared run any taps or flush the loo.
Thank you!
I'm presuming there's a leak in the underfloor pipe that feeds the bath tap. We have no water tank - it's a combi boiler.
So my question is - can I turn the water back on and wait till morning to call a plumber or do I need an emergency plumber?
Edit - I've just turned the water back on and, so far, all is quiet but I haven't dared run any taps or flush the loo.
Thank you!
Answers
Best Answer
No best answer has yet been selected by Nahameb. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Thank you everyone. My plan is (altho' we've used other taps and flushed the loo with no problem) to turn the water off when we go to bed, and not to use the lights in the room where the water was coming through. I'm not sure there's anything more a plumber could do tonight anyway without a lot of upheaval in the bathroom!
If you have turned the water back on and there is no further leak this confirms that your problem is not your mains supply, otherwise it would leak instantly.
Remove the bath panel and I'd bet you will find your problem is to do with the waste from the bath. If you get hold oof the waste and make sure the compression fittings are pushed together and tight. If so go down the pipe to the next joint and check that as well.
Remove the bath panel and I'd bet you will find your problem is to do with the waste from the bath. If you get hold oof the waste and make sure the compression fittings are pushed together and tight. If so go down the pipe to the next joint and check that as well.
Lovely non-emergency plumber has been. Waste seems to be fine. Problem appears to be by the taps which are, unfortunately, the type that are on the length of the bath rather than at the head, so you can't get at them to see what's going on. So he's isolated the water to the bath whilst he goes away to consult.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.