Is Saving £21000 Per Year Good
Family & Relationships1 min ago
Unable To Print After New Router
Unable to get colour printer or photocopier at small charity office to work after new router. Router company says get it dept to look but not possible. Printer and photocopy owners say we added new router so not their fault.
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by hazelcs. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
I had a router problem just last week which meant that my printer could no longer connect to it. Fortunately it was dead easy to fix, so hopefully it will be the same for you. (However I can't give you precise instructions because you've not provided the make and model of either your printer or photocopier).
Any new router almost certainly has a 'WPS' button on it. If it's not actually labelled 'WPS' then it's likely to have a symbol somewhat similar to a 'recycling' one ( http://
You need to hold down the WPS button on the router for 5 seconds, release it and then, quickly afterwards, press the corresponding button on your printer. (Then repeat for any other device which needs to be connected to the router).
Some printers (and other devices) have a dedicated 'WPS' button but on others (including mine) you need to go into the menu settings to turn a particular button into the WPS one. Please ell us the make and model of the printer (and of any other relevant devices) if you need help here.
Any new router almost certainly has a 'WPS' button on it. If it's not actually labelled 'WPS' then it's likely to have a symbol somewhat similar to a 'recycling' one ( http://
You need to hold down the WPS button on the router for 5 seconds, release it and then, quickly afterwards, press the corresponding button on your printer. (Then repeat for any other device which needs to be connected to the router).
Some printers (and other devices) have a dedicated 'WPS' button but on others (including mine) you need to go into the menu settings to turn a particular button into the WPS one. Please ell us the make and model of the printer (and of any other relevant devices) if you need help here.
Only 1 answer
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.