Eye Cast Over This Month's Irish Players...
Crosswords1 min ago
It was always said that even if you could build a battery as large as Everest, no more than 1.8 volts could be had from it.
The digital camera I bought came with two batteries each marked showing a higher voltage.
Please explain how this can be.
No best answer has yet been selected by Segilla. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Segilla, when you say battery, you aren't being very specific.
As kempie says, a battery (meaning a single cell) has a nominal voltage, depending upon the technology. Lead-acid would be around 2v, nickel-cadnium 1.2v, lithium 2v etc etc, there's loads of different combinations. The voltage produced depends upon the chemical's characteristics.
Battery is more often taken to mean 'collection of cells' and this is how you get higher voltages. The cells are connected in series and the voltages of each are summed. 12v car battery = 6 x 2v cells in series. Submarines had (have?) hundreds of cells connected together, to make a battery with hundreds of volts. Incidentally, so do many telephone exchanges, even today.
So, Segilla, you're more or less right, in that no matter how physically large a cell was constructed the voltage would never be any different to that determined by the chemistry involved. Lead-acid 2v, etc etc. But a bigger battery would have a bigger storage capability (IE run for longer).
If you combined enough cells to equal the size of Everest and each cell had a potential difference of 1.8 volts between each terminal and they were connected in parallel then the total emf would still be 1.8v but they would be able to supply a total current equal to the sum of I max for each cell multiplied by the total number of cells. If you were drawing the same current for a given load from this BATTERY as was required from the single CELL of same pd then the battery would last much longer as it's capacity has now increased. This is referred to as the Amp Hour (ah) rating.
If the cells were connected in series to form a battery then the total emf would equal the sum of pd's of each cell but the I max would be restricted to the I max for the individual cell.
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.