Quizzes & Puzzles6 mins ago
Double Insulated Lighting
I got what I thought were just the right bar lights for my kitchen only to find they could not be fitted as we need double insulated lights. I now can't find anything like I want as they all seem to be pendant lights. does anyone know if its possible to get bar lights (a bar with four spot lights attached ) that are double insulated? It seems the only other way is to have my house completely rewired. How much would that cost?
Answers
http://vi.ra ptor.ebaydes c.com/ws/eBa yISAPI.dll?V iewItemDescV 4&item=1 22725512030& amp;category =117503& pm=1&ds=0&t= 150671390400 0&ver=0& cspheader=1
08:31 Wed 13th Jun 2018
The electrician is rightly being cautious – he could be held responsible for installing the lights without an earth connection.
However I have installed such ceiling lights (in my own property); the danger is that the insulation within the lights breaks down and the metalwork becomes live. If this was to happen and you touched the metalwork you could very well receive an electric shock.
So you have to ask yourself how often are you touching the ceiling light fixture metalwork?
The only time you are likely to do this is when changing a bulb – if you isolate the circuit at the consumer unit when you change a bulb you will be safe.
So one option is to install it yourself and take the above precautions.
A second option, rather than having the house re-wired is to have an earth wire run to the fitting only (which would be a lot cheaper) – the cost would very much depend on how easy it is for the electrician to make that connection.
However I have installed such ceiling lights (in my own property); the danger is that the insulation within the lights breaks down and the metalwork becomes live. If this was to happen and you touched the metalwork you could very well receive an electric shock.
So you have to ask yourself how often are you touching the ceiling light fixture metalwork?
The only time you are likely to do this is when changing a bulb – if you isolate the circuit at the consumer unit when you change a bulb you will be safe.
So one option is to install it yourself and take the above precautions.
A second option, rather than having the house re-wired is to have an earth wire run to the fitting only (which would be a lot cheaper) – the cost would very much depend on how easy it is for the electrician to make that connection.