Quizzes & Puzzles7 mins ago
Twisted internal Victorian doors after being stripped
4 Answers
I have recently had six internal victorian doors stripped of excessive paint at the local strippers in preparation for minor repairs before undercoating and repainting. Unfortunately, two of the doors have twisted about an inch out of true. Is it possible to take out the wedges (what is the best way to do this), and retrue the doors in some way?
Richard
Richard
Answers
Best Answer
No best answer has yet been selected by MGPB1936. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Yes. One small part of my empire is a joiner's shop in which we have a very large metal press (something like a book press) with five large capstan head screws in which we press all sorts of distorted timbers straight. When doors twist, which is not uncommon, we tend to put them on bearers on the floor and apply weights selectively. If we have time, we sometimes hang twisted doors in a frame and put bolts on the outside face top and bottom, then heave the doors shut, shoot the bolts and leave them for two or three weeks. We never dismantle because you only end up with some impossibly shaped bits, we always press. It works, and is permanent.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.