ChatterBank6 mins ago
Stripping A Varnished/Stained Table Back To Bare Wood.
14 Answers
So earlier this year I tried, in vain, to strip our garden table back to the bare bones, so I could varnish / stain it from scratch.
I'm not sure what's on it at the moment - varnish, stain , a combination .... who knows??
I tried paint stripper .... maybe I didn't leave it on long enough, but it didn't do the job.
I tried an electric sander ..... that got some of it off, but some of it is well and truly stuck on.
Anyway, I'm wondering if I could use something like this, but I'm worried it might be too harsh and scratch the wood, although I'm wondering if I don't go too heavy, I could sand out any scratches?? It's a decent quality table so I don't want to risk ruining it.
This is what I'm thinking of using:
https:/
Anyone any advice please??
I'm not sure what's on it at the moment - varnish, stain , a combination .... who knows??
I tried paint stripper .... maybe I didn't leave it on long enough, but it didn't do the job.
I tried an electric sander ..... that got some of it off, but some of it is well and truly stuck on.
Anyway, I'm wondering if I could use something like this, but I'm worried it might be too harsh and scratch the wood, although I'm wondering if I don't go too heavy, I could sand out any scratches?? It's a decent quality table so I don't want to risk ruining it.
This is what I'm thinking of using:
https:/
Anyone any advice please??
Answers
1 to 14 of 14
Best Answer
No best answer has yet been selected by Gizmonster. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Might be better off using these, not so harsh on the wood as a wire wheel.
https:/
https:/
My friend used to renovate antique furniture. She tried all sorts of techniques for removing paint and varnish etc but in the end she decided it made far more sense just to pay for a dip and strip service, such as this one:
http://
You'd probably be charged about forty quid for the job (plus collection and delivery costs if needed), which might be well worth the money if it saves you countless hours of labour!
http://
You'd probably be charged about forty quid for the job (plus collection and delivery costs if needed), which might be well worth the money if it saves you countless hours of labour!
I did this earlier in the year.
1. Sanded marked and stained wood with a block, fine saning paper and Elbow grease.
2. Wipe afterwards with a moist cloth to remove dust, and let dry in the sun.
3. Stain to required colour dabbing with a cloth, not painting.
4. Give a light coating with yacht varnish.
https:/
1. Sanded marked and stained wood with a block, fine saning paper and Elbow grease.
2. Wipe afterwards with a moist cloth to remove dust, and let dry in the sun.
3. Stain to required colour dabbing with a cloth, not painting.
4. Give a light coating with yacht varnish.
https:/
I tried sanding with a sander and by hand with a block, with various grades of sandpaper - it got parts of it off, but some bits are well and truly "welded" on lol :P
I tried various scrapers and paint strippers - all to no avail.
The dip and strip service would be okay if it was nearer. I'd gladly pay £40 if it was guaranteed to come back stripped, but I'm in East Lancs.
Anyway, in Tony's link I found these, they look a real bargain:
https:/
I tried various scrapers and paint strippers - all to no avail.
The dip and strip service would be okay if it was nearer. I'd gladly pay £40 if it was guaranteed to come back stripped, but I'm in East Lancs.
Anyway, in Tony's link I found these, they look a real bargain:
https:/
I agree with Ryzen about cabinet scrapers.
Whenever I've had to get right back to bare wood, I usually use something like these..........
https:/
Otherwise, as Chris said, I've just used a Dip n Strip company.
But...........
That's a really good way with older furniture that isn't terribly valuable.
The problem that can arise, is that the glue holding the joints together tends to get washed out by the caustic soda, and everything gets a bit wobbly.
For a garden table, I'd risk it though. Otherwise, scrapers every time.
Whenever I've had to get right back to bare wood, I usually use something like these..........
https:/
Otherwise, as Chris said, I've just used a Dip n Strip company.
But...........
That's a really good way with older furniture that isn't terribly valuable.
The problem that can arise, is that the glue holding the joints together tends to get washed out by the caustic soda, and everything gets a bit wobbly.
For a garden table, I'd risk it though. Otherwise, scrapers every time.
1 to 14 of 14
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.