DIY dust extractor

ST.Andrew | 20:12 Wed 17th Oct 2007 | DIY

2 Answers

I have recently aquired a woodturning lathe & was astonished at the amount of fine dust which had accumulated in the short time .I was wondering if anyone had made up a home made dust extractor ,Maybe just a box at the back of the lathe with a hoover motor or fan & a pipe leading out to the back of the shed .Anyone got any ideas perhaps a small sketch attached Thanks in anticipation
ST.Andrew

First Fix stage - what does this include?

kithen cupboard doors argh!!!!!

Answers

1 to 2 of 2

Best Answer

No best answer has yet been selected by ST.Andrew. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

heathfield

Some tips here, here, and here!

ST.Andrew

Question Author

Thanks Heathfield I think the last tip would be most suitable, Idont have a lot of room between the lathe & the shed wall, I was toying with the idea of using the motor out of a Dyson cleaner set up behind a filte r in a box butths would be sucking through the motor which would soon block up It seems to work ok in cylinder cleaners as long as the bag is emptied & the filter cleaned regularly ,An extractor fan would be another idea .Will give it plenty thought whatever Thanks again
Regards
ST.Andrew

1 to 2 of 2

Do you know the answer?