Quizzes & Puzzles13 mins ago
condensation on toilet cisterns
10 Answers
does anyone know where i can obtain a "drip tray"to fit underneath a porcelain cistern that catches condensation so that the water does not wet floor and rot floorboards ?
Answers
Best Answer
No best answer has yet been selected by chrisgolf0. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hi chrisgolf0
Have a look round a garden centre for the trays used to stand potted plants in when they require watering. There are some long ,thin and narrow types that are decorative as well. You should be able to find one that will fit in the space you have ,provided that there is somewhere to stand the tray on.
Actually, the water that runs into the 'tank' (as it's called here in the U.S.) is always colder than the surrounding air. Same thing occurs in airconditioned bathrooms on warm summer days. The difference in temperatures causes the condensation, which is aggravated if there's warm, moist air from a bath or shower.
Consider this... remove all of the water from the tank (excuse me, 'cistern') and dry it thoroughly. Obtain a small sheet of Rigid Foam insulation from your DIY store (looks like this: http://www.owenscorning.com/around/insulation/ products/foamular.asp , DIY stores sell small sheets and often 'made to fit' kits just for this application such as this: http://plumbing.hardwarestore.com/51-291-misc- tank-interior/toilet-tank-liner-kit-with-adhes ive-671112.aspx) Using any good waterproof glue (the ready made kits have adhesive already applied) cut and glue the insulation on the inside of the tank, lining it completely. This will quickly and effectively solve your problem without a tray of water standing around becoming smelly...
There is a special 'mixer valve' that can be purchased but it's installation is usually done by a professional. Seen here: http://www.thisoldhouse.com/toh/article/0,,218 961,00.html ...Best of luck!
Consider this... remove all of the water from the tank (excuse me, 'cistern') and dry it thoroughly. Obtain a small sheet of Rigid Foam insulation from your DIY store (looks like this: http://www.owenscorning.com/around/insulation/ products/foamular.asp , DIY stores sell small sheets and often 'made to fit' kits just for this application such as this: http://plumbing.hardwarestore.com/51-291-misc- tank-interior/toilet-tank-liner-kit-with-adhes ive-671112.aspx) Using any good waterproof glue (the ready made kits have adhesive already applied) cut and glue the insulation on the inside of the tank, lining it completely. This will quickly and effectively solve your problem without a tray of water standing around becoming smelly...
There is a special 'mixer valve' that can be purchased but it's installation is usually done by a professional. Seen here: http://www.thisoldhouse.com/toh/article/0,,218 961,00.html ...Best of luck!
blimey Clanad!
I had this prob in the house I have just sold, It was a right mess and we had to keep wiping it dry, but I bought one ofthose trays with an inner tray that you put silica gel crystals in, my mum used to use them on her window sills, they are only a �1 (from Poundland!) and they do work!
P.S., when you have removed all the water how do you dry it??
I had this prob in the house I have just sold, It was a right mess and we had to keep wiping it dry, but I bought one ofthose trays with an inner tray that you put silica gel crystals in, my mum used to use them on her window sills, they are only a �1 (from Poundland!) and they do work!
P.S., when you have removed all the water how do you dry it??
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.